Owon HDS-N Series Manual de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
OWON HDS-N Series Handheld DSO & DMM 10-Appendix
77
10. Appendix
10.1 Appendix A: Specifications
10.1.1 Oscilloscope
Only if other instructions are provided, are all technical specifications applicable to the probe with
the 10X attenuation switch setting and the HDS-N series digital type oscilloscope. In order to be
up to these specifications, the oscilloscope should meet the following requirement.
The instrument should operate continuously for more than 30 minutes under the specified
operating temperature.
If the operating temperature is up to or larger than 5 Celsius degrees, the system function
menu must be opened to make the system perform a "Auto- calibration" procedure (see
"calibration" on P55).
Except those specifications marked with the word Typical, all specifications can be up to.
Sampling
Sampling modes
Normal sampling
Peak detection
Average value
Sampling rate
100 MS/s----HDS1022M-N
Max 500 MS/s----HDS2062M-N
Max 1 GS/s----HDS3102M-N
Input
Input coupling
DC, AC, Ground
Input impedance
1 MΩ±2% connected in parallel with 20 pF±5 pF
----HDS1022M-N
1 MΩ±2% connected in parallel with 15 pF±5 pF
----HDS2062M-N, HDS3102M-N
Probe attenuation coefficient
1X, 10X, 100X, 1000X
Max. Input voltage 400 V (peak)
Channel delay timetypical
150 ps
Horizontal
Sampling rate range
0.25 S/s - 100 MS/s----HDS1022M-N
0.25 S/s - 500 MS/s----HDS2062M-N
0.25 S/s - 1 GS/s----HDS3102M-N
Waveform interpolation
sin x/x
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88

Comentarios a estos manuales

Sin comentarios